Search results

The purpose of this paper is to propose a bolt loosening detection approach which integrates piezoelectric ceramics with active sensor technology.

When the ultrasonic wave propagates across the contact surface at the bolted joints, because of the existence of imperfect interface, only part of the ultrasonic wave energy is passed through it. According to the Hertz contact theory, the passed energy depends on the true contact area which is decided by the bolt pretension. Hence, by measuring the received energy with the sensing piezoelectric material, the bolt pretension or bolt loosening can be detected.

The experiment revealed that the wave energy propagated across the interface is strongly correlated to the torque level. This relationship will be a good indicator to detect the status of bolted joints. The presented method has a potential application for the monitoring of bolt load loss in-site. Moreover, some factors which will affect the propagation of ultrasonic wave across the bolted joints are discussed in this paper.

This paper provides a good criterion to detect bolt load loss.

The purpose of this paper is to examine the direct effects of Internet use on rural residents' income growth and the indirect effects of increasing their income by promoting rural residents' entrepreneurial and non-agricultural employment.

Regarding the implementation of the rural revitalization strategy, based on the 2016CFPS data, multiple linear regression analysis and mediation effect analysis are used. To decrease the potential endogeneity of the model, we used the instrumental variable in the model.

The results show that: (1) Internet use has a direct effect on rural residents' income growth; (2) rural residents' entrepreneurial or non-agricultural employment affects the mechanism of Internet use and their income growth, so that can perform an indirect promotion effect; (3) the direct promotion effect of Internet use is stronger than the indirect promotion effect of entrepreneurship and non-agricultural employment.

The effect of using Internet for the income growth of Chinese farmers has been confirmed by some scholars, but the specific mechanism is still relatively vague. The originality is to consider the intermediary transmission effect of entrepreneurship and non-agricultural employment in the study of the impact of Internet use on Chinese farmers' income growth, and use the mediation effect model for empirical analysis. The empirical research results further reveal this mechanism.

The application of thermal barrier coatings (TBCs) allows aero-engine blades to operate at higher temperatures with higher efficiency. The preparation of the TBCs increases the surface roughness of the blade, which impacts the thermal cycle life and thermal insulation performance of the coating. To reduce the surface roughness of blades, particularly the blades with small size and complex curvature, this paper aims to propose a method for industrial robot polishing trajectory planning based on on-site measuring point cloud.

The authors propose an integrated robotic polishing trajectory planning method using point cloud processing technical. At first, the acquired point cloud is preprocessed, which includes filtering and plane segmentation algorithm, to extract the blade body point cloud. Then, the point cloud slicing algorithm and the intersection method are used to create a preliminary contact point set. Finally, the Douglas–Peucker algorithm and pose frame estimation are applied to extract the tool-tip positions and optimize the tool contact posture, respectively. The resultant trajectory is evaluated by simulation and experiment implementation.

The target points of trajectory are not evenly distributed on the blade surface but rather fluctuate with surface curvature. The simulated linear and orientation speeds of the robot end could be relatively steady over 98% of the total time within 20% reduction of the rest time. After polishing experiments, the coating roughness on the blade surface is reduced dramatically from Ra 7–8 µm to below Ra 1.0 µm. The removal of the TBCs is less than 100 mg, which is significantly less than the weight of the prepared coatings. The blade surface becomes smoothed to a mirror-like state.

The research on robotic polishing of aero-engine turbine blade TBCs is worthwhile. The real-time trajectory planning based on measuring point cloud can address the problem that there is no standard computer-aided drawing model and the geometry and size of the workpiece to be processed differ. The extraction and optimization of tool contact points based on point cloud features can enhance the smoothness of the robot movement, stability of the polishing speed and performance of the blade surface after polishing.

Drawing on self-determination theory, this study reveals the formative and functional mechanism of entrepreneurial leadership and constructs an integrated model that combines objective and subjective career success.

Using data from 189 leaders from China, this study examined the relationship among cognitive style, social norms, entrepreneurial leadership and career success. Using SPSS version 25.0 and AMOS version 23.0, factor analysis, correlation, path analysis and moderation analysis were performed.

The results indicated that innovative cognitive style is positively related to entrepreneurial leadership, and this relationship is reinforced by social norms. Adaptive cognitive style is negatively related to entrepreneurial leadership, but this relationship is not regulated by social norms. Besides, this study found a significantly positive relationship between entrepreneurial leadership and objective career success, while entrepreneurial leadership does not demonstrate a significant relationship with subjective career success.

By combining subjective and the objective career success into entrepreneurial leadership research, the findings provide a new perspective for understanding what other experiences entrepreneurship can bring to leaders. Furthermore, the current study analyzes the informal institutional environment's promoting and impeding roles between cognitive style and entrepreneurial leadership.

The purpose of this paper is to examine the influence of the innovation ability of universities (IAU) on the efficiency of University–Industry knowledge flow and investigate whether the level of provincial innovative agglomeration (PIA) moderates the relationship between IAU and the efficiency of the University–Industry knowledge flow.

This study uses the super-efficiency data envelopment analysis model to measure knowledge research efficiency (KRE) and knowledge transformation efficiency (KTE) and then studies the influencing mechanism of the two kinds of efficiency using the spatial Tobit model with panel data from 2008 to 2017.

The results show that the overall KRE in Chinese universities is higher than the KTE. IAU has a significantly positive impact on KRE and KTE. PIA has a significantly inverted U-shaped influence on KRE and KTE and positively moderates the promoting effect of IAU on KRE and KTE.

Due to the limitations of the data, this paper only selects several secondary indicators to measure KRE and KTE with reference to previous studies.

This study enriches the future research of University–Industry cooperation and knowledge flow and it is conducive to promoting the efficiency of University–Industry knowledge research and transformation from the perspective of universities, enterprises and local governments.

This study proposes the concept of University–Industry knowledge flow and divides the knowledge flow into the knowledge research stage and the knowledge transformation stage based on the knowledge supply chain theory. Moreover, the paper expands the theoretical framework of the impact of IAU on the efficiency of University–Industry knowledge flow and provides findings on the moderating effect of PIA.

This paper aims to develop an additive manufacturing technique for complex zirconia ceramic dental bridges.

To carry out this study, a dental bridge model was obtained by three-dimensional reverse engineering, and a light-curable zirconia ceramic suspension was formulated. Zirconia bridges were manufactured by stereolithography and then treated by vacuum freeze drying, vacuum infiltration and sintering. The optimal scanning speed was determined according to the shape precision comparison. Then, characteristics of the sintered ceramic parts were tested as size shrinkage, relative density, surface Vickers hardness, surface roughness and microstructure.

The method for preparation of light-curable zirconia suspension (40 volume per cent solid loading) with a viscosity value of 127 mPa·s was proposed. The optimal laser scanning speed for zirconia bridge fabrication was 1200 mm/s. A relative density of 98.58 per cent was achieved; the obtained surface Vickers hardness and surface roughness were 1,398 HV and 2.06 µm, respectively.

This paper provides a potential technical method for manufacturing complex zirconia dental bridges and other small complex-shaped ceramic components which are difficult to be made by other manufacturing techniques.

The salinity of the oilfield produced water has a significant effect on steel corrosion. The purpose of this paper is to study the influence of salinity on corrosion behavior of X60 steel and it also provides basic for material selection of gas wells with high salinity.

The weight loss experiment was carried out on steel with high temperature and high pressure autoclave. The surface morphology and composition of corrosion scales were studied by means of scanning electron microscopy, energy dispersive spectroscopy and X-ray diffractometry.

The results show that as salinity increases, the corrosion rate of X60 steel will gradually experience a rapid decline stage and then a slow decline stage. X60 steel is mainly exhibiting uniform corrosion in the first rapid decline stage and pitting corrosion in the second slow decline stage. The increase in salinity reduces gas solubility, which, in turn, changes the morphology and density of the corrosion scales of X60 steel. At low salinity, loose iron oxides generated on the surface of the steel, which poorly protects the substrate. At high salinity, surface of the steel gradually forms protective films. Chloride ions in the saline solution mainly affect the structure of the corrosion scales and initiate pitting corrosion. The increased chloride ions lead to more pitting pits on the surface of steel. The recrystallization of FeCO₃ in pitting pits causes the corrosion scales to bulge.

The investigation determined the critical concentration of pitting corrosion and uniform corrosion of X60 steel, and the new corrosion mechanism model was presented.

The purpose of this study is to establish a method for accurately extracting torch and seam features. This will improve the quality of narrow gap welding. An adaptive deflection correction system based on passive light vision sensors was designed using the Halcon software from MVtec Germany as a platform.

This paper proposes an adaptive correction system for welding guns and seams divided into image calibration and feature extraction. In the image calibration method, the field of view distortion because of the position of the camera is resolved using image calibration techniques. In the feature extraction method, clear features of the weld gun and weld seam are accurately extracted after processing using algorithms such as impact filtering, subpixel (XLD), Gaussian Laplacian and sense region for the weld gun and weld seam. The gun and weld seam centers are accurately fitted using least squares. After calculating the deviation values, the error values are monitored, and error correction is achieved by programmable logic controller (PLC) control. Finally, experimental verification and analysis of the tracking errors are carried out.

The results show that the system achieves great results in dealing with camera aberrations. Weld gun features can be effectively and accurately identified. The difference between a scratch and a weld is effectively distinguished. The system accurately detects the center features of the torch and weld and controls the correction error to within 0.3mm.

An adaptive correction system based on a passive light vision sensor is designed which corrects the field-of-view distortion caused by the camera’s position deviation. Differences in features between scratches and welds are distinguished, and image features are effectively extracted. The final system weld error is controlled to 0.3 mm.

It is essential to level the drilling platform across which a drilling robot travels in a slant underground coal mine tunnel to ensure smooth operation of the drill rod. However, existing leveling methods do not provide dynamic performance under the drilling conditions of the underground coal mine. A four-point dynamic leveling algorithm is presented in this paper based on the platform attitude and support rod displacement (DLAAD). An experimental drilling robot demonstrates its dynamic leveling capability and ability to ensure smooth drill rod operations.

The attitude coordinate of the drilling robot is established according to its structure. A six-axis combined sensor is adopted to detect the platform attitude, thus revealing the three-axis Euler angles. The support rod displacement values are continuously detected by laser displacement sensors to obtain the displacement increment of each support rod as needed. The drilling robot is leveled according to the current support rod displacement and three-dimensional (3 D) attitude detected by the six-axis combined sensor dynamically.

Experimental results indicate that the DLAAD algorithm is correct and effectively levels the drilling platform dynamically. It can thus provide essential support in resolving drill rod sticking problems during actual underground coal mine drilling operations.

The DLAAD algorithm supports smooth drill rod operations in underground coal mines, which greatly enhances safety, reduces power consumption, and minimizes cost. The approach proposed here thus represents considerable benefits in terms of coal mine production and shows notable potential for application in similar fields.

The novel DLAAD algorithm and leveling control method are the key contributions of this work, they provide dynamical 3 D leveling and help to resolve drill rod sticking problems.